Electrician Continuing Education Requirements in Delaware
Delaware electricians must complete 5–10 hours of approved CE every 2 years to renew. Here is exactly what that involves — mandatory topics, how the cycle works, and the mistakes that cost licensees their active status.
The requirement at a glance
| Item | Delaware requirement |
|---|---|
| Total CE hours | 5–10 hours per renewal cycle |
| Renewal cycle | 2 years |
| Annualised average | 3.8 hours per year |
| Online CE accepted | Yes |
| Licensing authority | Delaware Board of Electrical Examiners (Division of Professional Regulation) |
Delaware requires 5–10 hours of approved continuing education every 2 years, which is among the lighter requirements nationally, well below the roughly 11-hour average most states set. On an annualised basis that is about 3.8 hours per year — a useful number to keep in mind, because the total figure looks different depending on whether you are budgeting your time across one year or 2.
With a 2-year cycle you have a reasonable buffer, but not enough to be casual about it. At roughly 3.8 hours per year the load is modest; the failure mode is not difficulty but drift — letting two quiet years pass and then facing the full 5–10 hours in the months before renewal.
Delaware does not let you satisfy the requirement with electives alone. The board names specific mandatory topics: National Electrical Code (NEC) (at least 5 hours). These are not interchangeable with general coursework, so a common mistake is completing the total hour count and only then discovering the mandatory portion was never covered. Book the mandatory topics first and fill the remainder with electives.
Whichever route you take in Delaware, keep your certificates. Boards conduct random audits and will ask for proof of completion, including the course name, provider, date and duration. Retain records for at least the length of your renewal cycle plus a margin — three to four years is the usual safe harbour. Enter your hours into the state licensing system before you submit the renewal, not after.
Mandatory topics in Delaware
| National Electrical Code (NEC) (at least 5 hours) |
Mandatory topics cannot be substituted with general electives. Confirm the current course titles and approved-provider list with the Delaware Board of Electrical Examiners (Division of Professional Regulation) before enrolling.
Stop tracking Delaware CE deadlines in a spreadsheet
CE Pilot logs every certificate, counts hours against your Delaware requirement, and warns you at 90, 60, 30 and 7 days before anything expires. Built for journeymen and master electricians.
See plans — from $19/monthFrequently asked questions
- How many CE hours do I need to renew my electrician license in Delaware?
- Delaware requires 5–10 hours of approved continuing education per 2-year renewal cycle. That works out to roughly 3.8 hours per year on average, though you are free to complete them in any pattern within the cycle as long as the total is met before your renewal date.
- Are there mandatory courses in Delaware?
- Delaware requires National Electrical Code (NEC) (at least 5 hours) as part of your 5–10 hours. Verify the exact current course title with the Delaware licensing authority before enrolling, since required course names change when rules are updated.
- What happens if I miss my Delaware renewal deadline?
- Missing the deadline means practising on an inactive or expired licence, which you cannot legally do. Most boards charge a late or reinstatement fee, and in some cases you must re-sit coursework. Diarise your renewal date the day you renew, not the week before it expires.
- Can I complete my Delaware CE online?
- Yes — Delaware accepts online continuing education for licence renewal. Some states cap the proportion of self-study or independent-study hours that may be counted, so check whether any portion must be completed in a live classroom or real-time virtual setting.
Compare Delaware with neighbouring states
32 hours / 3 yrColorado
24 hours / 3 yrConnecticut
4 hours / 1 yrFlorida
11 hours / 2 yrGeorgia
8 hours / 2 yrHawaii
4 hours / 3 yr
Requirements differ substantially between states — a licence valid on one side of a state line can carry a completely different CE obligation on the other.
All 50 states
14 hoursAlaska
16 hoursArizona
NoneArkansas
8 hoursCalifornia
32 hoursColorado
24 hoursConnecticut
4 hoursDelaware
5–10 hoursFlorida
11 hoursGeorgia
8 hoursHawaii
4 hoursIdaho
NoneIllinois
NoneIndiana
NoneIowa
18 hoursKansas
NoneKentucky
12 hoursLouisiana
NoneMaine
15 hoursMaryland
5–10 hoursMassachusetts
21 hoursMichigan
15 hoursMinnesota
16 hoursMississippi
2 hoursMissouri
NoneMontana
16 hoursNebraska
12 hoursNevada
18–30 hoursNew Hampshire
15 hoursNew Jersey
34 hoursNew Mexico
16 hoursNew York
8 hoursNorth Carolina
8 hoursNorth Dakota
8 hoursOhio
10 hoursOklahoma
12 hoursOregon
24 hoursPennsylvania
NoneRhode Island
15 hoursSouth Carolina
NoneSouth Dakota
16 hoursTennessee
NoneTexas
4 hoursUtah
16 hoursVermont
15 hoursVirginia
3 hoursWashington
24 hoursWest Virginia
NoneWisconsin
24 hoursWyoming
16 hours
Other professions in Delaware
CE rules differ by profession as well as by state — if you hold more than one licence, check the requirements for each.
Sources: Requirements compiled from Delaware Board of Electrical Examiners (Division of Professional Regulation) — Official state electrical licensing board rules and statutes (see per-state source comments), cross-checked against IAEI and Mike Holt state CE pages; compiled October 2026. National statistics (50 states, 0 to 34 hours per cycle, 3 years the most common cycle, 11-hour average) are from the same compilation.