Electrician Continuing Education Requirements in Utah
Utah electricians must complete 16 hours of approved CE every 2 years to renew. Here is exactly what that involves — mandatory topics, how the cycle works, and the mistakes that cost licensees their active status.
The requirement at a glance
| Item | Utah requirement |
|---|---|
| Total CE hours | 16 hours per renewal cycle |
| Renewal cycle | 2 years |
| Annualised average | 8.0 hours per year |
| Online CE accepted | Yes |
| Licensing authority | Utah Division of Professional Licensing (DOPL) |
Utah requires 16 hours of approved continuing education every 2 years, which is close to the national middle: the average state requires around 11 hours per cycle, and you are near that mark. On an annualised basis that is about 8.0 hours per year — a useful number to keep in mind, because the total figure looks different depending on whether you are budgeting your time across one year or 2.
With a 2-year cycle you have a reasonable buffer, but not enough to be casual about it. At roughly 8.0 hours per year the load is modest; the failure mode is not difficulty but drift — letting two quiet years pass and then facing the full 16 hours in the months before renewal.
Utah does not let you satisfy the requirement with electives alone. The board names specific mandatory topics: National Electrical Code (NEC) (at least 12 hours), NFPA 70E electrical safety (4 hours). These are not interchangeable with general coursework, so a common mistake is completing the total hour count and only then discovering the mandatory portion was never covered. Book the mandatory topics first and fill the remainder with electives.
Whichever route you take in Utah, keep your certificates. Boards conduct random audits and will ask for proof of completion, including the course name, provider, date and duration. Retain records for at least the length of your renewal cycle plus a margin — three to four years is the usual safe harbour. Enter your hours into the state licensing system before you submit the renewal, not after.
Mandatory topics in Utah
| National Electrical Code (NEC) (at least 12 hours) |
| NFPA 70E electrical safety (4 hours) |
Mandatory topics cannot be substituted with general electives. Confirm the current course titles and approved-provider list with the Utah Division of Professional Licensing (DOPL) before enrolling.
Stop tracking Utah CE deadlines in a spreadsheet
CE Pilot logs every certificate, counts hours against your Utah requirement, and warns you at 90, 60, 30 and 7 days before anything expires. Built for journeymen and master electricians.
See plans — from $19/monthFrequently asked questions
- How many CE hours do I need to renew my electrician license in Utah?
- Utah requires 16 hours of approved continuing education per 2-year renewal cycle. That works out to roughly 8.0 hours per year on average, though you are free to complete them in any pattern within the cycle as long as the total is met before your renewal date.
- Are there mandatory courses in Utah?
- Yes. Beyond the total hour count, Utah requires specific coursework — typically National Electrical Code (NEC) (at least 12 hours) and NFPA 70E electrical safety (4 hours). These mandatory topics cannot be substituted with general electives, so plan them into your schedule early rather than treating them as optional.
- What happens if I miss my Utah renewal deadline?
- Missing the deadline means practising on an inactive or expired licence, which you cannot legally do. Most boards charge a late or reinstatement fee, and in some cases you must re-sit coursework. Diarise your renewal date the day you renew, not the week before it expires.
- Can I complete my Utah CE online?
- Yes — Utah accepts online continuing education for licence renewal. Some states cap the proportion of self-study or independent-study hours that may be counted, so check whether any portion must be completed in a live classroom or real-time virtual setting.
Compare Utah with neighbouring states
16 hours / 2 yrTennessee
None / 2 yrTexas
4 hours / 1 yrVermont
15 hours / 3 yrVirginia
3 hours / 3 yrWashington
24 hours / 3 yr
Requirements differ substantially between states — a licence valid on one side of a state line can carry a completely different CE obligation on the other.
All 50 states
14 hoursAlaska
16 hoursArizona
NoneArkansas
8 hoursCalifornia
32 hoursColorado
24 hoursConnecticut
4 hoursDelaware
5–10 hoursFlorida
11 hoursGeorgia
8 hoursHawaii
4 hoursIdaho
NoneIllinois
NoneIndiana
NoneIowa
18 hoursKansas
NoneKentucky
12 hoursLouisiana
NoneMaine
15 hoursMaryland
5–10 hoursMassachusetts
21 hoursMichigan
15 hoursMinnesota
16 hoursMississippi
2 hoursMissouri
NoneMontana
16 hoursNebraska
12 hoursNevada
18–30 hoursNew Hampshire
15 hoursNew Jersey
34 hoursNew Mexico
16 hoursNew York
8 hoursNorth Carolina
8 hoursNorth Dakota
8 hoursOhio
10 hoursOklahoma
12 hoursOregon
24 hoursPennsylvania
NoneRhode Island
15 hoursSouth Carolina
NoneSouth Dakota
16 hoursTennessee
NoneTexas
4 hoursUtah
16 hoursVermont
15 hoursVirginia
3 hoursWashington
24 hoursWest Virginia
NoneWisconsin
24 hoursWyoming
16 hours
Other professions in Utah
CE rules differ by profession as well as by state — if you hold more than one licence, check the requirements for each.
Sources: Requirements compiled from Utah Division of Professional Licensing (DOPL) — Official state electrical licensing board rules and statutes (see per-state source comments), cross-checked against IAEI and Mike Holt state CE pages; compiled October 2026. National statistics (50 states, 0 to 34 hours per cycle, 3 years the most common cycle, 11-hour average) are from the same compilation.