Electrician Continuing Education Requirements in Texas

The requirement at a glance

Texas requires 4 hours of approved continuing education every 1 year, which is among the lighter requirements nationally, well below the roughly 11-hour average most states set. On an annualised basis that is about 4.0 hours per year — a useful number to keep in mind, because the total figure looks different depending on whether you are budgeting your time across one year or 1.

The one-year cycle is the detail that catches Texas licensees out. Because the requirement resets annually, hours you complete early cannot be banked against the following year, and there is no long runway in which to catch up. In practice this means you should treat CE as a recurring monthly commitment rather than an annual event — roughly 4 hours spread across twelve months is a far easier load than the same total crammed into the weeks before a December deadline.

Texas does not let you satisfy the requirement with electives alone. The board names specific mandatory topics: National Electrical Code (NEC), Texas electrician law and rules, Electrical safety (NFPA 70E). These are not interchangeable with general coursework, so a common mistake is completing the total hour count and only then discovering the mandatory portion was never covered. Book the mandatory topics first and fill the remainder with electives.

Whichever route you take in Texas, keep your certificates. Boards conduct random audits and will ask for proof of completion, including the course name, provider, date and duration. Retain records for at least the length of your renewal cycle plus a margin — three to four years is the usual safe harbour. Enter your hours into the state licensing system before you submit the renewal, not after.

Mandatory topics in Texas

Mandatory topics cannot be substituted with general electives. Confirm the current course titles and approved-provider list with the Texas Department of Licensing and Regulation (TDLR) before enrolling.

Frequently asked questions

How many CE hours do I need to renew my electrician license in Texas?

Texas requires 4 hours of approved continuing education per 1-year renewal cycle. That works out to roughly 4.0 hours per year on average, though you are free to complete them in any pattern within the cycle as long as the total is met before your renewal date.

Are there mandatory courses in Texas?

Yes. Beyond the total hour count, Texas requires specific coursework — typically National Electrical Code (NEC) and Texas electrician law and rules. These mandatory topics cannot be substituted with general electives, so plan them into your schedule early rather than treating them as optional.

Can I carry over extra CE hours to next year in Texas?

No. Texas renews annually, and surplus hours generally do not roll forward into the next renewal period. Completing well above the 4 hours minimum in one year does not reduce what you owe the following year — it only costs you time and money.

Can I complete my Texas CE online?

Yes — Texas accepts online continuing education for licence renewal. Some states cap the proportion of self-study or independent-study hours that may be counted, so check whether any portion must be completed in a live classroom or real-time virtual setting.

Compare Texas with neighbouring states

Requirements differ substantially between states — a licence valid on one side of a state line can carry a completely different CE obligation on the other.

All 50 states

Other professions in Texas

CE rules differ by profession as well as by state — if you hold more than one licence, check the requirements for each.